CM070 Shank-type cutter DP (spiral end mill)
Product
Drawing
-
- Polycrystalline diamond [DP]
- MEC
Article
Description
Machine / Application
- Can be used on CNC and gantry machines
- Standard tools (ID 80474998-80475001) in diameters 6.0 mm and 8.0 mm
- With pushing cut and chip breaker for composites
- With pulling cut without chip breaker for NF metals (aluminum, titanium, ...)
Design
- Constant hook angle along the entire edge length
- Large spiral angles and number of teeth are possible also for small diameters
- Plunge cuts into the material only possible in helix or ramping motion
Advantages
- Smooth running and cutting surface free of tool marks due to continuous, spiral DP edges
- Can be resharpened up to 3 times
Notes
- Face cutting edge or plunge tip and other dimensions and configurations on request
|
Ø D
[mm] |
Ø D
[inch] |
L2
[mm] |
Ø d
[mm] |
Ø d
[inch] |
L1
[mm] |
Z | Helical direction |
Shear∡
[°] |
Type | L/R | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||||||
| 6 | 12 | 6,0 | 70 | 3 | negative | -7 | A | R | 80474998 | ||||
| 6 | 12 | 6,0 | 70 | 3 | positive | 7 | A | R | 80475000 | ||||
| 8 | 16 | 8,0 | 80 | 4 | negative | -7 | A | R | 80474999 | ||||
| 8 | 16 | 8,0 | 80 | 4 | positive | 7 | A | R | 80475001 | ||||
| 8 | 8 | 8,0 | 80 | 3 | positive | 20 | B | R | 187198 | ||||
| 10 | 30 | 10 | 80 | 4 | positive | 8 | B | R | 187199 | ||||
| 3/16 | 16 | 1/4 | 50.8 | 3 | negative | 8 | C | R | 80468652 | ||||
| 1/2 | 20 | 1/2 | 81 | 4 | positive | 15 | B | R | 187200 | ||||