188041 - Gang-Rip Saw Blades HW "WS"
Product
Drawing
-
-
- Tungsten Carbide [HW]
Technical data
Description
Machine / Application
- molders
- gang-rip saws with one or two shafts
- for precise ripping cuts in dry and planed solid woods and wood-based materials
Design
- staggered double keyways of type A and C
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 06 for wood-based materials
- cutting material: HW HL Board 20 for solid woods
Advantages
- staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
- larger bore (max. Ø 100 in) available for a surcharge
- for inquiries / orders enclose specification sheet (see appendix)
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 200 [mm] | |
| B = Cutting width | 3,2 [mm] | |
| b = Body thickness | 2.2 [mm] | |
| Ø d = Bore diameter | 60 [mm] | |
| Z = No. of teeth | 42 | |
| Hook angle = Hook angle | 20 [°] | |
| Corner∡ = Corner angle | 10 [°] | |
| Tooth geometry = Tooth configuration | WS | |
| LEUCODUR = Cutting material | HL Board 06 | |
| L = Delivery Status | ||
| Machine/Type | Paul | |
|
Dimensions entered are not listed?
available from stock |
||
